HOW I USE BROWN’S GAS FOR HEALTH ENHANCEMENT

By George Wiseman, Wed, 2009-08-12 19:57

Disclaimer: 
I cannot give any specific medicinal advice or I’d be ‘practicing’ medicine without a license…

I’m reporting personal, empirical and anecdotal evidence. 

The protocols I outline here are my own, that I use myself.  If you use them as a guide to make your own protocols, experiment at your own risk.  See medical disclaimer at bottom of page.

There are a lot of ‘Brown’s Gas for Health’ rumors floating around.  I’m trying to confirm them with facts.  So far, this link outlines some data and I’ve started putting ‘other’ data HERE:

Below are various ways I apply Brown’s Gas (HHO) to myself.
NOTE: When I drink the water and breathe the gas, my body decides where the Brown’s Gas goes to help my body heal. When I apply externally, I decide what gets healed.

Treatment protocol 1 (Drinking the Water): 
I drink nothing but pure distilled water that has been ‘enhanced’ by bubbling Brown’s Gas (BG) through it.  BG adds hydrogen, oxygen and ExW to the water, creating (in my opinion) the most healthful water on the planet.  It goes beyond just hydrogen bubbled water.  

Brown’s Gas bubbled water has been tested by three world renowned water experts that make their living selling healthful water and ALL THREE immediately bought one of my machines after testing the water… And none returned the machines!

My experiments show that it takes about 10 minutes per liter of water using a BG gas rate of 50 liters per hour to get maximum BG diffusion / infusion / absorption into the water… Based on ORP tests.

The bubbling is MUCH more effective / efficient if you use a fish tank air stone to make lots of small bubbles.

I use ORP meters to detect maximum hydrogen absorption.  

pH means ‘potential of hydrogen’ and each of the 14 ‘steps’ is logarithmic, meaning 10 times more hydrogen than the last.
Hydrogen is ‘pH neutral’, it doesn’t raise or lower pH.  Learn more HERE:  Note that high pH water for health is a MYTH, based on 40 years of incorrect assumptions and miss-information.  SCIENCE has finally put that myth to rest.  It was the HYDROGEN in the ‘high pH’ water that was giving the health gains, NOT the pH.

Typically the pH of BG bubbled water rises just a little.  Note that you need a meter to read this pH change, pH testing papers are not up to the task.
 
Note that hydrogen alone will not raise pH, because hydrogen is pH neutral… To raise or lower pH, you add or subtract electrons.  The Brown’s Gas bubbled water will slightly raise the pH by adding electrons to the water with the ExW portion of the Brown’s Gas.
An ORP meter will read a minimum of -250 and as low as -450 (negative is better because shows added electrons).

NOTE: I DON’T CHEAT!  MOST ‘other’ high pH waters have and/or add minerals to achieve higher pH and lower ORP. I achieve (a bit) higher pH and low ORP by ONLY adding BG (hydrogen) to PURE water.

Alkaline (high pH) water is ONLY healthful if the pH comes from hydrogen.  MOST alkaline minerals are NOT bioassimilable ‘raw’ and some are even poisonous.  
For example, you can’t get iron by sucking on nails, you get bioassimilable iron by eating spinach or seaweed.
Many waters sold as ‘alkaline’ are high pH because of minerals added, not because of hydrogen added. 
If the ORP is positive, the water is actually sucking life energy OUT of your body as you drink it.

 Oxygen-Reduction Potential (ORP) meters that respond well to BG treated water.   

For example, when I test my tap water, it is +650 ORP (very bad).
If I then run the tap water through my under-counter RO system  (removing chlorine and other impurities)  and then through my Kangan K8 (flow-through electrolyzer) machine (separating the ‘bad’ ions out of the ‘cleaned’ water), I get about 0 ORP (not bad but also not healthful).
Then I bubble with BG to achieve the -250 (very healthful because the ORP is achieved ONLY with -OH ions, NOT by adding contamination).

NOTE: For this experiment, I fed my Kangen machine RO water, which Enagic does NOT recommend because they like to use the existing minerals in the water to enhance their pH and ORP levels.  I do not feel that is most healthy.  I remove the minerals to get my pure healthy water.

NOTE: I do NOT ‘normally’ run my drinking water through an RO machine and a Kangan machine before bubbling it with Brown’s Gas.  That was just for relative experimentation, for example.
I use ONLY distilled water in my Drinking Water Jar, that I bubble with Brown’s Gas before I drink it.

NOTE: Since high pH (alkaline water) for health has been proven to be INCORRECT, my $5000 Kangen K8 machine is used as a doorstop.
After 40 years of miss-understanding, someone thought to test this ‘alkaline’ theory.
They kept the high pH and removed the hydrogen.  The health benefits disappeared.
They removed the high pH (made the solution pH neutral) and kept the hydrogen… and the health benefits remained.
The flow through electrolyzers did and do have health benefits BUT it’s because of the hydrogen the machines were/are adding to the ‘high pH’ water, NOT because of the high pH.   It was all about the hydrogen.

NOTE: The Oxygen Reduction Potential (ORP) of BG bubbled water is higher (less negative) than some other ways of hydrogenating water, because BG bubbled water is ALSO saturated with oxygen, (which obviously negates ORP).
However, BG bubbled water is ‘healthier’ than water infused ONLY with hydrogen, because of the additional constituents of oxygen, Electrically Expanded Water (ExW) and electrical energy.  
Note that fish can breathe BG bubbled water (high oxygen content) and grow bigger, faster. 

It is IMPORTANT to use pure water in your BG electrolyzer! 
If your water contains chlorine (for example) you will be drinking/breathing chlorine gas (very poisonous).  Other impurities have similar toxic issues.

There are many oxygen therapies and there is now an established belief that oxygenated water is good for human health.  
Certainly, oxygen has been proven to reduce or eliminate some pathogens in water and supplementary oxygen(and/or ozone) therapies help many people.

BUT, do not use oxygen therapies (like Ozone or MMS) at the same time as Brown’s Gas, because Brown’s gas is the ultimate anti-oxidant and will neutralize the oxidation.

We are (by weight) mostly oxygen and oxygen is needed by nearly every chemical process in our bodies.  As much as we need it, oxygen is also a poison that can kill us if the mechanisms in our bodies don’t control it.  Free oxygen, known as free radicals, cause huge damage inside our bodies.

Brown’s Gas is a mixture of energized hydrogen, oxygen and water vapor (click).

There’s now a body of scientific evidence that ‘hydrogenated’ enriched water is much more ‘healthful’ than just oxygenated water.  It seems that most of body ills and perhaps even aging are either caused by, predisposed by or exacerbated by a lack of hydrogen in our bodies.  

We are (by atomic volume) mostly made of hydrogen.  62% hydrogen by volume (24% oxygen, 12% carbon, 2% everything else)
Hydrogen is essential in nearly every chemical reaction in our bodies.  It helps maintain cell vitality and absorbs free radicals before they can do more damage.

It has now been scientifically proven that hydrogen SELECTIVELY eliminates oxidative free radicals. There are actually ‘good’ free radicals (like nitrous oxides) that signal some body processes and the hydrogen (the most effective and efficient ‘bad’ free radical eliminator) does not touch those.

Further, hydrogen has been proven to be an exercise mimic, you get benefits as if you exercised, WITHOUT excercising.  But note, if you DO excercise you also get a great gain.

Most liquids that we drink today, even some water, are acidic and ‘dehydrating’. This causes the body to become chronically ‘dehydrated’.  Dehydration seems to be a cause or a contributing factor for nearly all disease.

Even WATER can be ‘dehydrating’.   WHY and HOW can WATER be dehydrating?
For one example, refer back to the ORP.  
Water with a positive ORP is electron deficient and will SUCK electrons (energy) from your body to neutralize itself (causing aging and de-hydration).
Water with a negative ORP has excess electrons and GIVES the body energy (while neutralizing free radicals), reactivating the body’s regeneration and immune systems.
 

BG bubbled water seems to ‘hydrate’ the body like nothing else on earth (except breathing BG).  Seeming to enhance all body functions.  
I’ve been drinking BG bubbled water almost exclusively (few other liquids) since July 1, 2004; but my testimonial is ‘questionable’  because I have a ‘vested interest’ (I sell books, kits and machines to help people make BG).  
So I post testimonials of other people (with their permission) who have independently verified the efficacy of BG.

NOTE:  I’ve noticed that when I breathe the BG, I don’t feel thirsty.  
It’s then easy to fall into the trap of drinking too little water.  
PAY ATTENTION to this effect and be sure to regularly drink your BG bubbled water even if you don’t feel thirsty… 
I’ve found the COMBINATION of breathing and drinking to be much more effective than doing either alone (either alone helps, but both help MORE).

NOTE: % Duty Cycle (gas volume generated by the AquaCure) means NOTHING to the ‘charged %’ of the water.  The water becomes fully charged by flowing Brown’s Gas through it.

The only difference is how fast the water becomes charged (infused with hydrogen, oxygen and ExW).  If flowing less volume of Brown’s Gas through it, it will not become charged as quickly.

So the amount of charge in the water is only indirectly associated with the volume (Duty Cycle) of the AquaCure.  The water will eventually become fully charged no matter what the Duty Cycle of the AquaCure is set at.

Once charged, the Drinking water will stay fully charged, but not get any additional charge, as you continue to bubble it.  It starts losing it’s charge as soon as you stop bubbling it

So best is to drink it as soon as possible after it’s bubbled.

In a sealed water bottle, at room temperature, the ‘goodness’ is half gone in a day.

And yes,  the drinking water can be ‘re-charged’as often as I like.

If I bubble at 100% Duty Cycle, 1 liter (quart) of water will become fully charged in about 10 minutes.  If I bubble at 25% duty cycle, it may take 40 minutes to fully charge 1 liter of water.
So, for any ‘water’ use I would use fully charged water and simply bubble long enough for it to be fully charged. If I’m inhaling at 30%, it would take about 30 minutes to fully charge the water. That said, MOST of the charge (about 60%) in the water occurs in the first 1/3 of the time, so even if the water is used when it isn’t fully charged, good benefit can happen.

Treatment protocol 2 (Topical Application of the Water):  
Topically applied, BG hydrogenated water has been used to promote the fast healing of wounds, infections, wart removal, skin age spots removal and even (I’m told by multiple customers) skin cancer.  

The people reporting this say to keep the area ‘wet’ with the BG bubbled water.  They used cotton balls to hold the water and plastic bottle caps to hold the cotton and to keep the cotton from drying out. Changing the dressings frequently, as intuition guides.

BG Bubbled water is used in Japanese spas. Using Hydrogen BUBBLES 🙂 Just bubble Brown’s Gas in water with a bit of skin compatible dish soap to make the foam bubbles.

Treatment protocol 3 (Breathing the Brown’s Gas): 
I’m SHOCKED how far Asia is ahead of us with using BG for Health.  For example: EPOCH ENERGY TECHNOLOGY located in Taiwan, has successfully developed Brown’s Gas for Health businesses. Here’s a video of a walk-in clinic The video is a Taiwan local news interview of EPOCH commercialized products (not in English but you’ll get the idea).  Anyone can step in for a BG treatment, easy as getting a cup of coffee.
In Japan, they are using BG (HHO) in Spas, for beauty and health.  Over the years I’ve breathed BG many times (pure Brown’s Gas is scientifically proven to be absolutely non-toxic)…
But in the past I recommended not breathing it because its explosive…  The above videos reminded me that if you mix the BG with enough air, it becomes NON-explosive!  

I feel like an idiot sometimes, not seeing what I SHOULD have known immediately. I didn’t think NOT breathing BG was that big of a deal because BG (particularly the hydrogen) does go through the skin OK, but the lungs are ‘designed’ to get gasses into the blood stream, so are the most efficient delivery of BG into the body.
You get a LOT more effective treatment using a lot less gas, and I’m all for efficiency! 
The above videos caused me to totally reverse my recommendation about breathing BG.  
I’ll tell you WHY.

In the past I’ve always said that it’s a bad idea to inhale an explosive gas into your lungs and I still think that’s true, IF the gas is explosive.  
BUT there is a way to breathe BG safely as a NON-explosive gas… by mixing it with enough air!   If you mix BG with enough air, the volume of hydrogen falls below the lower ignition limit (of 4% by volume) and the BG becomes NON-explosive and you STILL get all the wonderful health effects!  There is no question that, even though BG can enter the body (get into the blood) through the skin, it is MUCH more effective to get into the blood via the lungs.

There are THREE important aspects to consider when breathing Brown’s Gas (aka. BG, HydrOxy or HHO):

First, there MAY be a tiny bit of lye mist in the BG, this can cause a painful kind of pneumonia.  I had it happen to me in my early breathing experiments (1996) where I was breathing the BG directly, not scrubbing it through water. To prevent that, use two bubblers (or you can use oxygen humidifiers) in series so that the BG flows through water twice before you breathe it; to be SURE there is no lye in the BG.  

NOTE: I’ve now only used one bubbler for years, so my double bubbler recommendation above is being super conservative.  I’d still do it, if I was having a foaming problem (lye infused foam coming out of the machine).  

Water absorbs (scrubs / traps) any residual lye so the BG is fresh and clean.  Super conservative is to change the water in both bubblers (humidifiers) after each hour of electrolyzer use (I change out every 4 hours).  I use distilled or deionized water in the humidifiers so I won’t be inhaling chlorine and other gasses often found in tap water.  

If using pure water and my electrolyzer isn’t tossing out foam, there’s no reason I couldn’t drink the BG bubbled water (so doing two techniques at one time).  I drink my bubbler water and I give it to our cats (who will choose it over tap water). 

Second, ‘new’ oxygen formed in the ER50 is very ‘active’ (high oxidative potential) and feels harsh if I breathe it directly.  Fortunately, bubbling the BG through water ‘smooths out’ that harshness so it’s literally BETTER than a breath of fresh air!

Third, to be SURE that the BG is NON-explosive, don’t use too much!
I don’t want to exceed the explosive limit for hydrogen (hydrogen will NOT explode if there is only a little in the air).
MORE IS NOT BETTER.  Once your blood is saturated with hydrogen, you will be breathing out as much hydrogen as you are breathing in, so there is literally NO REASON to breathe a mixture that has so much hydrogen that it is potentially explosive.

To find out how much BG is safe, let’s do some quick math
(you can skip this for now if you wish, I know most people don’t like math): If I breathe (normal adult resting) 5 liters/minute of air = 300 liters/hour
https://en.wikipedia.org/wiki/Respiratory_rate
https://en.wikipedia.org/wiki/Respiratory_minute_volume and hydrogen lower combustion limit is 4%
https://en.wikipedia.org/wiki/Hydrogen and BG is 2/3 hydrogen and 1/3 oxygen… (300 L/h * 0.04 = 12 L/h)  (12000 mL/60 per minute = 200 mL/m)  
I take away the oxygen from the calculation to find how much hydrogen I can breathe safely.  200/(2/3) = 300 mL/m of Brown’s Gas

So I can have up to 300 milliliters/minute (18 liters/hour) of BG and still be in the safe (non-combustible) zone.  

Some people ask me, I have XXX disease or ailment… HOW LONG DO I INHALE?
Obviously I cannot tell anyone how long to inhale. I’m not an MD and Every Body is different. There is NO simple one ‘cure all’ for everything.

That said, it seems that LONGER is better than MORE.

It is now well established scientifically that 2% hydrogen in the intake breath is therapeutic and at 2% the blood becomes saturated with hydrogen in about 15 minutes…  When inhalation of hydrogen stops, the blood returns to baseline (hydrogen saturation disappears) in about 15 minutes.

Once the blood is saturated, ALL excess hydrogen is EXHALED, so ‘more’ (like inhaling 4%) does nothing.

For maximum therapeutic efficacy, we’ve discovered that LONGER is better than MORE.  

If doing MORE (higher %), the blood CANNOT accept more than saturation, so any hydrogen above what it takes to KEEP the blood saturated is simply exhaled (wasted).

But if the blood is KEPT saturated, then the hydrogen starts to sink into the tissues and organs, with beneficial results.  Once the blood is saturated even a 1% (inhaled) will KEEP the blood saturated.  My body size needs 36% AquaCure adjustment for a 2% hydrogen inhalation, so I’d adjust the AquaCure to 18% for a 1% hydrogen inhalation.

To get the hours in, because busy lives prevent sitting in one spot for hours,  inhaling while sleeping is usually a workable option.

As for the breathing, I find it best to use cannulas (breath through nose), and if the mouth falls open during sleep, to use a chin strap to hold the mouth shut.

Gas Adjustment Evolution:

Originally I adjusted the capacitance of the ER50 to limit the gas production.  Note that this video was made in March of 2016 and I looked much older than I do now.
At 120 VAC, 60 Hz and with 80 uF of capacitance, the ER50 produces 50 liters/hour of BG.  
So to produce 18 liters per hour, I’d use about 30 uF of capacitance in the ER50 power supply.  For the ER50, I recommend oil-filled ‘motor run’ capacitors and you can pick them up at surplus prices online.

For the first version of the AquaCure (AquaCure model EA-H160), I adjusted the gas rate by using a small volume (one ounce) of lye or by using the mini-torch valve. 

For the AquaCure model AC50, I simply adjust the gas volume electronically. By far the simplest, most accurate and easiest way.

Another great side effect of the ER50 modification/application (lower capacitance) is that you’ll only be drawing about 0.5 amp DC, which means that it’ll take a lot longer for the ER50 to get too hot, if it ever does.  
The ER50 can then be operated (in clinics, etc.) for long periods of time without supplementary cooling. 

The AquaCure AC50 doesn’t have ‘overheating issues.  It is fan cooled and can operate 24/7.

NOTE: Some people want a BIG electrolyzer for clinics, etc.; so they can serve a lot of customers BUT I note that ‘Goat Logic’ applies here (and I see Epoch did that).  
It takes 5 goats to equal the milk production of 1 cow.  But if that one cow gets sick you lose ALL of your production.  If you have 5 goats, you can have some of them not in production (for various reasons) and still have milk (besides I prefer goat milk).
 
OK, I wasn’t always an inventor, I grew up on a cattle ranch and after agriculture college I had a 60 head goat herd (my cattle ranching Dad wasn’t impressed); but that is another life and story.

So… In this case, having several AquaCure is much better than having one ER1200.  They are easily portable and each ‘health station’ can have its own unit.  You can also have a couple of spare AquaCure‘s to trade out when any are down for maintenance.  
If you need more gas production for a particular project, it is also perfectly acceptable to combine the gas production of two or more AquaCures. 

I know (as of January 2016) that there are at least three clinics that are using Brown’s Gas technology to treat their patients and ALL report good results.  I hope to get permission to provide you with details.  

The nice thing about the AquaCure is that you can get these results AT HOME! 
When I started experimenting with breathing the Brown’s Gas,  I was amazed at how much energy it gave me (revved me up so much I had trouble sleeping) and it helped clear gunk from my lungs that I didn’t even know was there.  Once my body got used to the BG, my sleeping became normal.  
But BG affects every body differently.  For my current wife, it puts her to sleep (peaceful restful sleep), so each body seems to KNOW what it needs to heal itself.

I have several other health benefits too, detailed elsewhere because MY testimony is not credible (I have a Vested Interest in you buying my machines) so I’m also reporting other people’s results. 

However, breathing BG (since March of 2016) I’ve experienced NO negative side effects but  I’ve also heard of an effect called herxheimer reaction, where the body can feel weird as it ‘adjusts’ to it’s healthier self (cleaning out toxins, etc.). My technique was to start slow (starting with 5 minutes 3x the first day, increasing 5 minutes each day) to let my body gets used to it.  Once breathing 20 minutes 3x a day, I could breathe all day and night with no ‘weirdness (only health).

I find it’s also more effective to spread the minutes out over the day (like 3 of 10 minute treatments) rather than 1 of 30 minute treatment.  
This is another reason to have your own machine.
I can now breathe BG continuously throughout the day (for hours) because my body has gotten used to it (and I suspect has cleared out most of the toxins as I also shed 35 excess pounds).   

Another advantage is the Brown’s Gas contains TWICE as much hydrogen as oxygen (and a special form of water I call Electrically Expanded Water (ExW)). 
Hydrogen could be called the element closest to GOD, being the smallest and simplest physical atom and comprising most of the known Universe.  It also seems to spontaiously pop in and out of existence…

It’s my opinion (based on transmutation research) that EVERYTHING is made from hydrogen. Our bodies (like the Universe) are mostly hydrogen by volume.  and hydrogen is essential to most of the body’s thousands of chemical processes.   Our bodies NEED hydrogen (both in elemental and ion form) but there’s a catch… Hydrogen is NOT easy to get!  
Hydrogen attaches itself to other atoms to make all kinds of different molecules.  So our bodies have developed the ability to get hydrogen by splitting molecules!  
 The most common reaction is between Carbonic acid and the hydrogen and bicarbonate ions• CO2 + H2O –> H2CO3 –> H+ + HCO3¯   

Another MAJOR source of hydrogen involves the bacteria (micro-biome) in our gut.  As our food (mostly hydrocarbons) gets broken down, it turns into hydrogen and oxygen (plus other minerals that are in the food).  It is the bacteria in our Colin that does the final separation of the hydrogen from our ‘hydro-carbon’ food.
However, the widespread use of antibiotics KILLS all bacteria (including the good ones) and most pro-biotic supplements do not include bacteria specifically intended / designed to get the hydrogen from our food.  So we’ve become chronically hydrogen deficient!

The point is that as we age and when we are sick, our bodies have less ability (both lack of energy and impaired ‘splitting’ mechanisms) to ‘get’ the hydrogen that we NEED to heal and stay healthy!  Thus the ‘aging’ spiral… Which, I seem to be reversing with BG supplementation (I even now have some hairs on what was previously a shiny bald head)! 

Enter Brown’s Gas!  By breathing (inhaling) the hydrogen and oxygen (and ExW) we give the body a chance to acquire these essential life supporting elements (particularly hydrogen and ExW) without having to spend energy (we may not have) AND we bypass potentially impaired ‘splitting’ mechanisms!    It’s my opinion that Brown’s Gas would also help healthy bodies STAY WELL!  Of course living a healthy lifestyle is also essential 🙂

Various scientific studies are now indicating a 30% to 50% healthy life extension might be possible, if hydrogen levels in the blood can be maintained.  

Years ago, In the 1990’s, I breathed pure BG from a 3000 L/hr electrolyzer (pure BG will even make a squeaky voice (like helium) when in the lungs).   
However, I still Do Not recommend breathing Brown’s Gas undiluted; if you do so, you do it at your own risk!  Not because the BG is poisonous, because it’s been proven healthy to breathe, but because it is explosive… For Safety, I MIX IT WITH AIR.

 It’s my understanding (from Yull Brown’s literature) that even the US Navy has tested BG as an underwater breathing gas.  I don’t know if they are actually using it… Because BG is EXPLOSIVE, see BG exploding in this video…  The KEY to breathing BG safely is to dilute it with other gasses to UNDER the lower explosive limit (as I’ve detailed above). 

DANGER: In other words, for those people who believe ‘if a little is good, a LOT is better‘, it’s NOT TRUE in this case.  
A LOT of BG does NOT give you any more benefit and can actually (and spectacularly) KILL YOU.  
While BG is perfectly healthy to breathe in theory (none of the constituents are individually harmful and people HAVE breather ONLY 100% BG…) 

In practice and reality it’s an explosive gas and needs to be treated with RESPECT. Here is me, breathing BG from my personal ER50.  It is set to 18 liters/hour for my breathing.  This video was taken when I first started breathing BG regularly… I made the video to prove inhaling BG was safe, not because I expected any health benefits… I thought I was healthy!

I’ve now set it up so I can do a BG treatment when working on my computer or watching TV.  
NOTE: For about 2 years, I personally used the full 80uF capacitance to make my breathing BG, which is about 50 liters/hr just to prove it’s a non-poisonous mixture for breathing, well aware that it is potentially an explosive mixture.  I’ve since stopped doing that, since I knew I was pushing my luck and I’m enjoying this life.

NOTE: If a person ACCIDENTALLY inhales at 100% and there is no explosion, there are ZERO unhealthful side effects.   As explained above, ANY hydrogen the body doesn’t need is simply exhaled.  The DANGER is inhaling a potentially explosive mixture… Perfectly safe and healthful UNLESS it explodes… In which case the result is instantly un-healthful.

Note: If a person is on oxygen already (bottled or concentrator) then they can tee in the Brown’s Gas and get a hydrogen health boost at the same time.  Adding hydrogen will NOT make the oxygen explosive, if you stay below the ignition limit as described above. 
I now (January 2017) have a report, from a customer, that BG is as effective at raising blood oxygen levels as breathing pure O2 from a bottle or concentrator.  
You can prove this for yourself if you have a blood oxygen meter. Interesting relivant fact: Lungs Make Blood.  It’s been long assumed that blood was only made in the bone marrow.  It turns out that the lungs also produce blood constituents.  This is important because breathing BG should help that process. It’s also effective to use the BG in a bag on your arm/leg/etc.  See below: 

Treatment protocol 4 (Topical Application of the Gas): 
Using the gas directly on the skin.  
For example, to treat carpal tunnel syndrome, a technique is to put on plastic or rubber gloves and feed the gas into the glove.  You do not need much pressure or gas volume.  So far, several short treatments seem to work better than a single long one.  Like 10 minutes three times a day.

Imagination is needed to make apparatus for other parts of the body, like suction cups or such.  I’ve heard ideas to use full body suits, like dry suits.  Maybe even a huge plastic bag.  Again, it is an explosive mixture, you must have NO ignition sources – even static electricity can ignite BG.

NOTE: I’ve never had it happen myself and BG has now been used by HUNDREDS of people for YEARS, so explosions are RARE (and preventable).
But I now (as of March 2017) have two reports from BG users who HAVE had their bagged BG explode.
The first one had it happen as he was pulling the hose out of the bag on his wife’s arm.  I’m assuming she was wearing some sort of clothing that had a static charge.
The second one got up and walked across a carpet to let the dog out and as he touched the doorknob the static spark ignited the BG in the bagged arm. 

In both cases there was no physical harm done because the plastic bag is not solid enough to allow pressure to build, so the ‘explosive’ pressure spike just dissipates into the room (with a loud BANG,
the dog was scared and pooped on the floor).

PREVENTION: Simply don’t have ignition sources (like static electricity) near the BG.  Everyone knows what types of materials make static sparks, and rooms that have higher humidity have lower static electricity.  You can also ground yourself (touch) to the metal parts of the machine before touching plastic parts.

Direct gas application like this (bagged or cupped BG) is said to be healing cramps, arthritis, etc.  
I’ll post years of research done by Loyd Jacob, a chiropractor in Spokane Washington. Once introduced to BG, Loyd’s patients insisted on having BG as a part of their treatment.

Here’s a young woman getting an effective treatment for her Carpal Tunnel.

Treatment protocol 5 (New Water Potential): 
Make ‘new water’ using an apparatus that collects the water reformed by the BG flame. I have not yet built my own apparatus to do this.  Research in this area has been done by Joseph Bender and Norman Wootan.

You can just point the flame directly at water, and the water existing will collect the ‘condensed’ new water.

This new water has properties that seems to allow ‘programming’ and ‘transmutation’.  

Program the water by having the environment you want to impress upon the drinker (or plants) in existence when the new water is formed (created) from the BG flame.

Rumors about transmutation (click): 

Once you have the reformed water, you put it in a transparent container.  Have sunlight shine through the material (you want to ‘transmute’ in the new water) and then shine on the new water.  This supposedly imprints the ‘template’ of the material onto the new water.  Some of the new water should transmute.  It may help to occasionally shake both bottles.

I have not done this myself, only have a second hand report of this being done with a vitamin/mineral supplement.

Again, if the new water is formed without residual lye (use bubbler to scrub BG before burning) then it should be drinkable.  This is an area that I have almost no research and there may be fantastic possibilities.  Our bodies do this kind of transmutation all the time, this water could help that process.

That’s all I can report at the moment.  More information (and video links) are coming

I hope this information helps you realize the IMPORTANCE of safely issues involved in applying the BG to yourself, your family and friends.

Here’s to your for health and prosperity. 

FAQ:

Q1. I’m going with 2 Humidifiers -even though a lot of people are saying that it injects water up in their noses- have you experienced with it?

GW:
1A. If water gets into the hoses it will squirt into the nose, which is surprising and tickles but not dangerous.  
You’ll want a tissue handy to blow your nose.  Yes, it’s happened to me too.
This is NOT ‘bad’ in that one Ayurvedic remedy is to actually pour water into the sinuses to clean the ‘garbage’ out of them.
In any case, water occasionally gets into the hoses in two ways:
A. By the liquid level in the humidifiers being too high, splashing up into the hose and 
B. Water vapor condensing out of the super saturated (high humidity) Brown’s Gas.
C. …Of course water will get into the hose if you tip the humidifier on its side too… 

Q2. I would need 2 of these connectors, correct?: http://www.wtfarley.com/DISS-Male-With-Quarter-Barb

GW:
2A. You’ll need one for each humidifier.  Many people use just one humidifier/bubbler and that should be fine, I now only use one.  
There’s only ONE advantage to using more than one Humidifier:It’s a fraction ‘safer’ in that you double scrub the BG (so NO possibility of lye in the BG)

Personally I now just use one bubbler, made out of a 2 liter bottle, so I make plenty of BG bubbled water.  I drink the bubbled water everyday so it gets changed often.  Changing the water often is an important consideration to prevent lye contamination in the BG you breathe. 
Of course, you do what’s needed to prevent foam from getting out of the electrolyzer because THAT’s how lye primarily escapes.

Q3. This timer would work okay, right?:  
https://www.amazon.com/dp/B00SNU8EUM/ref=wl_it_dp_o_pC_nS_ttl?_encoding=…

GW:
3A. Technically yes, it’d function.   The whole idea of the timer is to generally prevent the machine from operating for too long (without being attended) and getting a low water level.  We now use these timers.
Low water level is what kills the machines.
NOTE: That the new AquaCure machines have low liquid level shutoff safety feature. 

3B.  The exception is when you want to sleep all night with the Brown’s Gas inhalation.  Then you want your timer to have a ‘continuous’ function, so it doesn’t shut off… And this makes the low liquid level shutoff doubly important.  
Note that the machines operate best when kept near full.

Q4. I went to the Culligan’s site and I didn’t find anywhere that their water is “Deionized”… I’ve read it’s Reverse Osmosis.

GW:
4A. Reverse Osmosis is one technology used to create ‘deionized’ water.  Culligan Reverse Osmosis (RO) water is deionized.
Actually, RO units are now inexpensive > $300 and can be mounted under your own sink.  Just be sure to maintain it properly (changing filters and membrane) to assure it’s doing its job. 

Q5. You drink the water from both bubblers.  Doesn’t the water in the first bubbler have lye in it?

GW:
5A. Unless there is actually foam coming out of your machine, the amount of lye in the first bubbler will be miniscule particularly if you change the water everyday. Think of it this way.  The lye you put in the electrolyzer should last at least 20 years with using the electrolyzer at least 1 hour a day and … So just how much do you think could possibly be in the bubbler after a few minutes? 
I bubble the BG through water, for three reasons:
1. Because I find the ‘new’ oxygen to be rather harsh (oxidizing) unless I bubble it (seems to smooth it out).
2. To remove even the POSSIBILITY of even a tiny bit of lye getting into the lungs (which hurts like pneumonia).
3. To mitigate water surges from squirting out.  BG contains a fair amount of water moisture that condenses in the hoses.  It feels funny if squirted up the nose.  The bubbler tends to trap most of that moisture. 

Two bubblers was overkill, because I was being EXTRA careful.  I now only use one larger bubbler, so I get enough bubbled water to drink (and share with pets, family and friends). 

Q6. How long do I bubble the water to fully saturate it? 

GW:
6A. It depends on 
1. the bubbler stone you are using (wider dispersed, smaller bubbles is better)
2. depth of the bubbler (deeper is better)
3. temperature of the water (colder is better)
4. volume of BG (more is faster)
5. quality of BG (more ExW is better)

So using my diffuser stone at 5 “ depth and room temperature water at 50 LPH of BG from my machines
I fully saturate a liter of water in 10 minutes. 

Q7. How long does the water stay ‘healthful’ after bubbling? 

GW:
7A. That depends on:
1. the temperature of the water (colder is better)
2. the material of the container (for some weird reason aluminum is best) So generally a plastic or glass bottle will lose half it’s ‘healthfulness’ in one day.  If kept in the fridge in an aluminum container, it will lose half it’s healthfulness in three days. 

I assure you, if THIS water could be bottled and have a shelf life, I’d be selling bottled water, not electrolyzers.  It’d be a lot easier and I’d make a BUNCH more money (like the big water companies do).
But as it is, people need to ‘make’ their own healthy water and use it ASAP after saturated with BG… And having a machine allows BREATHING the BG, which seems to give ADDITIONAL health benefits far beyond simply drinking hydrogen enriched water. 

Q8. What’s the process for sleeping breathing?

GW:
8A.
1. I fill the AquaCure with water from the Humidifier, empty the rest of the Humidifier water and refill it with fresh distilled water.

2. I put the AquaCure timer on continuous mode (so it won’t turn off).

3. I adjust the Duty Cycle to half of my normal (if 38, go t0 19)

4. I put on a comfortable cannulas
 (research sleeping with oxygen online)

 I find my mouth sometimes drops open when I sleep.  I THINK it’d be good to use one of the straps that keeps my mouth closed, so that I inhale through my nose
https://www.msn.com/en-us/lifestyle/rf-buying-guides/best-anti-snore-chin-straps-reviews

5. Sleep peacefully.
There is NO limit to how long I can inhale or how many nights I can use it like this.

Disclaimer:
The content of this website is based solely on research conducted by Eagle-Research, unless otherwise noted. The information is presented “as is” for your educational purposes only and is not intended to diagnose or prescribe for any medical or psychological condition, nor to prevent, treat, mitigate or cure such conditions or prevent any disease. Eagle-Research has no duty whatsoever to update any information on this website.

The information contained herein is not intended to replace a one-on-one relationship with a doctor or qualified healthcare professional. Therefore, this information is not intended as medical advice, but rather a sharing of knowledge and information based on our or as noted other parties’ research and experience. Eagle-Research encourages you to make your own health care decisions based on your judgment and research in partnership with a qualified healthcare professional. These statements have not been evaluated by the United States Food and Drug Administration or any other regulatory body. We recommend that you do your own independent research before purchasing anything.
My statements are NOT approved by the FDA, AMA, CIA, FBI, ATF, NSA, DHS, etc.
  ~ Just assume what I have to say hasn’t been (and isn’t likely to be) approved by any government, medical (or Pharmaceutical) organization! 

Some issues are more resistant to mitigation than others.
It took years to get in your current condition.  With myself some issues (like warts and scars) took a few months to see some of my results but now, after breathing the BG for just over a year, people are telling me I look like I did when I was 45 (I’m currently 60).  At first I seemed to be reversing my biological ‘look’ by one year for each month I breathe the BG.

I try to DRINK at LEAST 1 liters a day, preferably more, bubbled WATER from the bubbler

I inhale for at least 4 hours (up to 8 hours) a day, everyday.

I seem to be well on the way to better health, all I need now is persistence.

May the blessings be
George Wiseman