by | May 8, 2019 | ER HyZor (General), FAQ
A. The HyZor Technology is identical in both the Book and the HyZor Basic Kit. Everything in the ‘HyZor Technology’ book is applicable to the ER HyZor (basic) Kit except that we have designed the kit chamber, components and circuit board to be less...
by | May 8, 2019 | ER HyZor (General), FAQ
A. Yes. It can be easy to move the system to another vehicle. It could even be ‘built’ in such a way as to allow it to be moved to a vehicle that is rented or borrowed for short times. ‘Demo’ units could be installed on prospective...
by | May 8, 2019 | ER HyZor (General), FAQ
A. If the ER HyZor fails to produce Brown’s Gas, your vehicle will act exactly as it did before the ER HyZor was installed.
by | May 8, 2019 | ER HyZor (Install and Op), FAQ
A. Yes! ER HyZor Technology was developed in Canada over a period of 20 years, before being released in its present form. In temperatures colder than -30°F the water:lye solution will turn to slush. When the ER HyZor turns on, the electric current will thaw the slush....
by | May 8, 2019 | ER HyZor (Install and Op), FAQ
A. It is a good idea to remove the ER HyZor once a year to empty out the sludge. Pour out the sludge through a coffee filter so that the electrolyte solution can be reused. Wash the chamber by swishing it with water several times. Be careful not to spill lye on...
by | May 8, 2019 | ER HyZor (Install and Op), FAQ
That depends on the amperage going through the ER HyZor and how long the engine is running. If the ER HyZor is using 2 Amps, it will use about 5 mL of water per hour.
by | May 8, 2019 | ER HyZor (Install and Op), FAQ
A. Distilled water will reduce maintenance requirements. De-ionized water can be used in a pinch but NOT recommended. Do NOT use tap water. Tap water is full of impurities. Water turns into Brown’s Gas (a mixture of hydrogen and oxygen), which leaves all the...
by | May 8, 2019 | ER HyZor (Install and Op), FAQ
A. Lye (as a catalyst) is added during the initial fill. After that you refill with pure water. The lye stays in the ER HyZor and does not need to be replenished.
by | May 8, 2019 | ER HyZor (Install and Op), FAQ
You can first try grocery stores and hardware stores, because pure lye has traditionally been sold as sold as drain cleaner. It is great for this because it has NO environmental consequences when poured down the drains. Lye is produced by burning wood, so the...
by | May 8, 2019 | ER HyZor (Install and Op), FAQ
A. The ER HyZor should be standing up straight for the most efficient operation. A couple of degrees of angle in any direction, won’t cause problems.
