Search Results for: hyzor

HYCO 2A CANISTER (ASSEMBLED)

The HyCO 2A works on carbureted and fuel injected vehicles.

It currently gives double the gains of Water as Fuel technologies commonly referred to as on-board electrolyzers or HOD (including our world-class HyZor Technology).

The HyCO 2A kit (cold gasoline vapor system) is a time tested, reliable fuel saving technology that (when fully installed and properly adjusted) typically gets 50% mileage increase.

The HyCO 2A was put on-the-shelf in the early 1990s when most vehicles on the market became fuel injected. It did not work well with fuel injection because it introduces a ‘vacuum leak’ into the intake manifold.  The MAP sensor would note the pressure rise and ADD FUEL, negating the fuel savings!

That problem was solved (embarrassingly not by me) with a simple 15K potentiometer you can pick up for a couple of dollars at Radio Shack.
You can go online and search for “MAP enhancer” to buy one that someone else has made up all nice for you (there are lots on eBay).
The MAP sensor enhancer corrects (like the EFIE does for oxygen sensors) the signal coming from your MAP sensor, so that the vehicle’s computer doesn’t ‘see’ the vacuum leak and doesn’t add additional fuel.

This kit contains only the container and the parts associated directly with it; these are the components that people would otherwise have to build themselves (the HyCO 2A Manual tells you how to build them yourself).

The rest of the components needed to complete the HyCO 2A system installation (wires, hoses, clamps, valves, solenoids, fuel pump, etc.) are available at most automotive supply stores. The cost for the rest of the components varies depending on application, mostly being in the range of $70 to $150 dollars.

The HyCO 2A DVD and HyCO 2A Manual are now included with the purchase of any HyCO 2A Canister.  

To complete a HyCO 2A installation, you do need:
For carbureted vehicles: a basic Carburetor Enhancer Kit,
For fuel injected vehicles: Appropriate EFIE(s) and a MAP Enhancer (buy from eBay).

The HyCO 2A Installation DVD (included), shows, step by step, how to assemble a HyCO 2A canister, install a basic HyCO 2A system and how to tune the HyCO 2A system to enhance your regular fuel system’s efficiency. It has been professionally done and is a real gem. Nothing like this has ever been sold in the ‘fuel saver’ world.

Mechanically inclined people tend to learn things by seeing it done, instead of reading. By both showing the entire concept and the project details, we make the entire assembly process simple to understand. We expect that this video will help achieve our goal of many more successfully completed HyCO 2A systems.

SKU ER1-D1-0011 • 3.2341 lb / 1467 gm

HyCO 2A canisters won’t be available for the forseeable future. I’m swamped with other projects and don’t have time to ‘re-start’ production of these very practical fuel savers.  Anyone want to volenteer to be a manufacturer?

For people who find the upfront cost of our fuel savers high for their budget, we now offer a financing option (through PayPal) that may allow you to literally pay for your fuel saving investment with your fuel savings!

Thus you can buy this product at literally NO COST higher than you are ALREADY paying NOW!  Here is a fuel savings calculator to find what your fuel savings should be (click).

The financing is 6 equal monthly payments + a small finance fee.
To get the financing, just purchase the product using the PayPal option as you check out (you’ll need a PayPal account) and the financing option will automatically be presented to you during the normal checkout (payment) process.

After the technology is paid off, your fuel (and money) savings will continue!  So from that point you’ll have ‘extra’ money in your pocket!

 

HYCO 2A ‘GET MORE MPG’ (INSTALLATION)

The HyCO 2A Installation Video, ‘Get More MPG’ shows, step by step, how to assemble a HyCO 2A canister, install a basic HyCO 2A system on carbureted vehicles and how to tune the HyCO 2A system to enhance your regular fuel system’s efficiency.

You do need a HyCO 2A Manual, in addition to the video, to competently complete a HyCO 2A installation. The video has been professionally done and is a real gem. Nothing like this has ever been sold in the ‘fuel saver’ world. Mechanically inclined people tend to learn things by seeing it done, instead of reading. This video has several enhancements that help achieve a full understanding of the process. What to do is shown in clear and specific detail. By both showing the entire concept and the project details, we make the entire assembly process simple to understand. We expect that this video will help achieve our goal of many more successfully completed HyCO 2A systems.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT:This DVD is an assistant to the HyCO 2A Manual. It would not be possible to build the HyCO 2A using the DVD alone. The kit shown in the DVD has been discontinued, because there are not enough carbureted vehicles to justify our keeping it in inventory. However, the Manual and this DVD show more than enough information to help you build your own.

We do recommend the HyCO 2A on carbureted vehicles because, on carbureted engines, it gets twice the gains that the HyZor does. The HyZor gets twice the gains (of the HyCO 2A) when applied to fuel injected vehicles.

Be sure to install a Carburetor Enhancer before applying any fuel saver on a carbureted vehicle.

ER50 – Flat-Plate Kit (Brown’s Gas Electrolyzer)

  • Practical ‘table-top’ design.
  • Easy to set up and use.
  • Simple 40+ series-cell design.
  • Significantly more efficient
    ~ than traditional electrolyzers.
  • Produces Brown’s Gas
    ~ for experimental purposes.
  • Compatible with all worldwide power standards
    ~ from 100 to 270 VAC and 35 to 65Hz.
  • Produces 50 litres per hour at 120 VAC and 60Hz using 2 capacitors.
    ~120 VAC BG production can be increased to 100 L/Hr by doubling capacitance.
    ~ we tell you where to order extra capacitors if you want them.
  • Produces up to 100 liters per hour
      at 120 VAC and 60Hz using 4 capacitors.
  • Produces up to 100 liters per hour
      at 240 VAC and 50Hz using 2 capacitors.

This kit includes the ‘special’ parts needed to set up this small, high quality, experimental electrolyzer that will exceed the efficiency of ANY known commercial electrolyzer (except ours, of course :))

Commonly available (or optional) parts like the timer switch, float switch, wires, terminal ends and supplies like glue and lye (the electrolyte), are not included.
The ‘extra’ components shouldn’t cost more than $60.

You need to know how to wire a light circuit to have the skill level required for the electrical assembly and simple construction skills (and tools) to cut the plastic tubing and build the stand.

Comprehensive, up to date instructions are in the ER50 online Resources, which you get access to immediately after purchase of an ER50 Kit.

NO transformer needed: This electrolyzer uses Capacitive Amperage Limiting (CAL) power supply technology, as detailed in our Brown’s Gas Books (2 capacitors are included in box) to achieve its super-efficiency.  For more gas (BG) production, use more capacitors ~ the ER50 Resources tells you where you can order extra capacitors at surplus prices. 

The gas Pressure Relief Tubes (PRTs) Upgrade ($50 value) is now included at no additional charge.  These are the transparent side tubes.  This is a SIGNIFICANT efficiency upgrade as it helps increase gas production without increasing electrical input.

Access privileges to Eagle-Research’s ER50 Resources is automatic (no extra charge) with the purchase of this ER50 Electrolyzer kit.
If you wish to purchase the ER50 Resources WITHOUT first buying the ER50
(because it isn’t available and you are building your own…)
You can purchase the ER50 Resources HERE

ER50 Resources includes upgrades, assembly instructions and application details that you need to understand, optimize, build and use your ER50…  You will also need the Brown’s Gas Book 2 to understand the physical and electrical .design parameters

The tubes and tower are no longer Transparent PVC. To see the liquid level, just use the transparent side tubes (PRTs).

Transparent PVC is GREAT to see the Brown’s Gas (and ExW) being produced but the clear plastic has a really low softening temperature, exhudes oils into the electrolyte (which causes foaming) and gradually clouds (becomes translucent) anyway.
So all new kits will have white PVC only.

The ER50 is designed to last for decades.  The biggest killer of the ER50 is people running them too long without cooling.  The ER50 is not designed to exceed 37°C.  If it gets too hot, the plastic will deform enough so that the fittings will start to leak.  The duty cycle at 50 lph is about 20 minutes with a 3 hour cool down.  The duty cycle can be extended if 3 of 4″ computer cooling fans are added to prevent the plastic from exceeding 37°C.

The Electrical Efficiency Upgrade option is described in the ER50 Resources.  There are several ways to increase the wattage effciency of the ER50.  We don’t do it in the ‘standard’ version because (frankly) it’s more costly… But if you want maximum efficiency (which can go over 100% Faraday efficiency) we tell you how to do it.

The WaterTorch Upgrade option is described in the ER50 Resources.  The ER50 was originally designed to be a tabletop electrolyzer to provide a superior fuel-gas to mini-torches.  Handymen, Jewelers and Artists LOVE this gas once they try it, as it does a MUCH better job than traditional bottles gasses like acetylene.

The Float Switch Upgrade option is described in the ER50 Resources.  Float switch (automatic low water shutoff) is added when upgrading to the Agriculture application of the ER50, because the ER50 will be operating for hours unattended and low water level would kill the machine.

ER50 - Fully Assembled Option Example of Fully Operational Set Up
Eagle-Research Assembled Chamber Customer-Finished, Fully Operational

 

SKU# ER1-K1-0004 • kit • 6″H x 12″L x 9″W • 6.6137lb / 3000gm

Further DIY self assembly tips:

ER50 Assembly and Operation Manual identifies all the parts of the Basic ER50 Kit and shows how they go together.
https://eagle-research.com/wp-content/uploads/2019/06/21_ER50OpManV170124.pdf

Here is the Normal ER50 Kit online assembly video
https://www.youtube.com/watch?v=obpBHOfjrBA&t=1690s

Here is the assembled version / cost
https://eagle-research.com/product/er50-fully-assembled/

Here is how to assemble the agriculture version of
https://www.youtube.com/watch?v=Rm4qFFGuWxs&t=13s
but it is additional cost for parts and labor.  By the time you add all the ‘extras’ to equal the AquaCure, you might as well buy an AquaCure.  The refurbished AquaCure model AC50 is only $1800 USD.
https://eagle-research.com/product/aquacure-model-ea-h160/

ER50 terminal plate tips:

We silver solder the #10 by 3/4″ (10×24 threads) stainless steel pan and slotted head bolt onto the terminal plate.

Install O-ring and hot glue on terminal plate bolt threads.  The O-ring is Buna-N with 1/8” in rubber diameter with a 1/8” center hole.  The hot glue goes in an 1/8” ring on the threads above the O-ring (So it will go into the threads of the cap and seal them).

install terminal plates into the cap so that the bolt ‘just’ extends past the outside of the cap.  Then heat the terminal plate with a hot air blower (hair dryer works) until you feel the heat on the bolt end outside the cap (takes about 40 seconds).  At that point the hot glue is melted and will flow into the threads as you tighten down the terminal plate… BUT FIRST only screw in the terminal plate far enough to put a 10×24 nut on the bolt; holding the bolt (with a box end wrench) tight against the plastic will prevent the plastic threads from stripping out as you finally tighten the terminal plate against the inner side of the plastic cap.  The edges of the plate should ‘indent’ a bit into the plastic.  At this point you have a ‘double’ seal; the glue in the threads and the o-ring compressed between the plastic of the endcap and the steel of the terminal plate.

To tighten and re-seal, with the terminal plates installed, you can try to heat them and (using a nut against the plastic) turn the terminal bolt (I’d use two nuts locked together to allow a wrench to be applied) to re-tighten (squeeze) the o-ring seal… Then after all that cools, clean up the end of the cap and apply an epoxy (like JB Weld) around the terminal bolt and seal using a stainless steel washer.   Put the terminal end on the bolt and apply more epoxy.

As long as the ER50 (or HyZor) doesn’t overheat, that should seal it.

Extreme Mileage

IS GREATER THAN 200 MPG POSSIBLE?
(excerpt from Extreme Mileage 101 )  

Without a doubt, it has been possible to achieve > 200 mpg in a 2,000 lb car, since at least the 1940s!

In short, YES! Greater than (>) 200 mpg is possible. And we’re not talking about a model airplane engine powering a bike. We’re talking about a 2000 lb, four-door passenger vehicle.

However, if you want higher mileage, more power and lower pollution in the holy grail ‘little black box’ format you’ll have to do-it-yourself.   ER will continue to show you that it’s possible and how to go about achieving it. For now, the assembly of ER combustion enhancement technology is up to you. We’ve already experienced that various agencies can tie us up for years, if we try to market a finished product.   By giving this information to you directly we short-circuit the ‘suppression system’. We hope.
WHY IS EXTREME MILEAGE NOT APPLIED?
(excerpt from Extreme Mileage 101)If extreme mileage is possible, why isn’t it applied? Our truest answer:   “We don’t know!” It does seem odd to us that anyone in their backyard can develop a simple system
(like the HyCO 2A or the HyZor) and get better results than from the billions spent in the Research and Development programs of major vehicle companies. There have been thousands of fuel saving patents. As far as we are aware, not even one is on the market.

image

Other Uses

BROWN’S GAS TO ENHANCE COMBUSTION

We first wrote the ‘Water as Fuel, Book 1’ to let people show what possibilities have been hidden by ‘vested interest’ for over 100 years. We are now taking EACH technology in the ‘Water as Fuel, Book 1’ and writing a specific manual that tells you exactly how to apply it to your vehicle (and home). So far we have the ‘HyZor Technology’ Manual and the ‘Water Injection’ Manual.

The HyZor Technology is ‘state of the art’ onboard electrolyzer technology, there is nothing more practical out there. I hear of people that are trying to make ‘onboard’ electrolyzers work. All of them need to upgrade to the HyZor Technology. Most of them won’t copy the HyZor, because they want to patent and the HyZor is public domain… Too Bad and good luck to them :)))

In addition to making a superior electrolyzer (water splitter) in the HyZor design, we tell you how to reduce the amount of electricity you use to make the gas. That’s why we call the Manual “HyZor Technology”.

The power supply is vitally important because you are using engine energy (fuel) to make the electricity that makes the gas. Generally, for every watt of electricity that the alternator produces, you had to use 5 watts worth of fuel. So the combustion needs to be significantly improved to get any fuel gain. The HyZor uses super-efficient electrolysis (using a technique independently tested at 98% efficient) combined with innovative, efficient, practical power supply options. For most applications, the HyZor produces between 5% and 50% fuel savings.

The HyZor makes Brown’s Gas from water, and then uses the Brown’s Gas to enhance combustion, specifically in vehicles. It is simple and straightforward to build, install and operate.

Then, once you have the HyZor installed, the Brown’s Gas not only significantly enhances combustion, it acts as a catalyst to allow you to replace up to 50% of your fuel with water, with no significant performance loss. The ‘Water Injection’ book tells you how.

For more information on our fuel saver recommendations see:
https://eagle-research.com/faq/

OTHER INTERESTING QUALITIES OF BROWN’S GAS!

When you try to melt materials like rock, ceramic and brick, the material changes characteristics, going like a fused glass. If you continue to apply Brown’s Gas, the various materials will either melt or vaporize till you have only a pure form left. This resulting material has unique characteristics that it’s original form did not. Example: It’s is very much harder. If you keep heating this with Brown’s Gas, it will vaporize too.

Also, it’s been discovered that when Brown’s Gas reforms into water, it is NEW WATER and has some very unique characteristics. It seems that water contains vast amounts of life energy and information, which is erased when it is split apart and re-formed. This new water can be programed to give super-health to those drinking it, plants too. And there is some evidence to show that new water can be made into solids that are not water, further experiments to this ‘transmutation’ need to be done.

Possibilities

We are learning more applications for the gas all the time. Examples include making super-pure water (literally formed from atoms), spot glazing for ceramics, repairs on exotic materials, enhancing combustion of petro-fuels (HyZor Technology), neutralizing radioactive waste, etc.

We expect people who use the ERxxxx WaterTorches to discover uses we haven’t even thought of. The possibilities are so endless that this technology will change civilization as we know it.

POLITICALLY HOT BROWN’S GAS USES
We mention these applications here so that you can see why Brown’s Gas would be of interest to nearly anyone. Some of these applications are politically too hot for us to touch right now. We have enough internal (Eagle-Research) evidence to mention these uses as potentially real and are working to get independent verification. DISCLAIMER: Until we have independent verification we are describing the below information as RUMORS.

In the meantime, we feel that it is important to get as many ERxxxx WaterTorches out into the world as possible, so that the technology has public acceptance when we then tell people the many ways to use the Brown’s Gas for their personal benefit.

Pure ‘New’ Water Manufacture
We’re learning that water can be ‘programed’ to pass on health. This is easy to do with the water formed by the ‘exhaust’ of the Brown’s Gas flame. The production of Brown’s Gas ‘erases’ previous programing and then we can impress new programing on the water as it is newly reformed. We can make water that gives a feeling of relaxation and well-being just by drinking it.

Hydrated Water for Health
When Brown’s Gas is bubbled through clean water, the water absorbs oxygen and hydrogen. We think there is an additional energy (electrical in nature) added to the water as well. We find the drinking the resulting enhanced, oxygenated and hydrated water to bring us alert like drinking a cup of coffee, without the side effects.

Many people know that oxygenated water is healthful. There are many companies selling water that has had oxygen added to it.

What is generally unknown is that water is even more healthful when hydrogen is added to it. Drinking water is called hydrating the body. An astonishing fact is that chlorinated water, coffee, carbonated and sweetened fluids are generally dehydrating. Most of the diseases known to mankind (including aging) can be prevented or mitigated by hydrating the body.

Every test of Brown’s Gas enhanced water shows it to be super hydrating, far superior to regular water (as much as 10 times).

Enhanced water is an essential key to keeping an active youthful body as the years go by. We have reason to believe this water enhances every chemical process in the body, making a super immune system and mitigating the symptoms of aging, mostly caused by dehydration.

Detoxifying Water
In North America chlorine is used to purify water, intending to kill microorganisms that cause disease. Chlorine is a deadly poison and attempts are made to put in just enough to kill the microorganisms and not the person drinking it. Most of the rest of the world purifies water using Ozone, a form of oxygen. Oxygen kills the microorganisms without harm to people. Brown’s Gas is an excellent way to oxygenate drinking water.

Atmosphere Enhancement
We now live in an area that has very dry air. We were using nearly a gallon (4 L) of water a night to keep our bedroom moist enough so that we could breathe easily. We are finding that the Brown’s Gas gives us the same results using only a cup (250 mL) of water per night.

Muscle Relaxation; Pain Relief
When Brown’s Gas is applied to the skin, hydrogen and oxygen are absorbed which then flows (via blood) to muscles and joints that have problems due to dehydration, resulting in nearly instantaneous relief of pain caused from cramps and swelling. This relief continues for extended periods of time.

Speed Healing of Wounds
When Brown’s Gas is applied to a wound, hydrogen and oxygen are absorbed which kills anaerobic microorganisms and assists cell regeneration.

Help Plants Germinate and Grow
Plant growth can be enhanced by either hydrated water and/or ‘programmed’ water. The resulting plants and fruits are more healthful to eat, providing nutrition and energy that most current produce cannot.

Neutralization of Radioactive Waste
It has now been officially proven (in Canada) that Brown’s Gas can neutralize radioactive waste in seconds, easily and extremely inexpensively. This neutralization treatment can take place right at the nuclear reactor so there is no need to transport or store nuclear waste.

This issue is so politically HOT that we deliberately do not promote it. Brown’s Gas technology is not firmly enough in general use to prevent suppression by ‘vested interest’. This single application is worth billions of dollars and can revolutionize the nuclear power generation industry.

Creating New Industrial Materials
Brown’s Gas can both make and weld rubies together. Brown’s Gas can weld sapphires together. When Brown’s Gas cooks rocks, it turns then into semiprecious material; for example feldspar (30% of earth’s crust) turns into a transparent form of moonstone, which can be used as a nearly indestructible building material (colors can be added).

Transmutation
We’ve learned of two ways of using Brown’s Gas to make materials that did not exist in the original samples. We can make metals from water. Again, too politically HOT to touch.

Inexpensive Toxic Waste Disposal
Brown’s Gas is an implosive flame, with the power to reduce nearly any material to it’s basic components (usually nontoxic). So enclosed chambers can be built to vaporize PCBs and other toxic waste.

Vastly Increase Recoverable Ore
In tests conducted by several mines, Brown’s Gas treated ore allowed recovery of up to three times more mineral. Brown’s Gas can be used to treat waste dumps of obsolete mines, recovering more mineral than the mine originally produced. Again, this application is worth billions of dollars.

Underwater Breathing Gas
Brown’s Gas is nontoxic and breathable. When used as an underwater breathing gas it allows divers to stay underwater longer and come up faster because the hydrogen does not cause the bends as much as nitrogen or helium. This would allow much more use of ocean resources.

Super-Efficient Room Heating
Generally, Brown’s Gas is a poor way to space heat, because the flame radiates very little infrared (heat) energy.

However; there is evidence that, using catalytic materials, a Brown’s Gas heater can be constructed that radiates huge amounts of heat and does not require any room venting. The efficiencies stated are 400%. In other words, a 1000 watts input will produce 4000 watts of heat. Eagle-Research has not yet verified this, but has seen enough evidence to list it here.

Surface Treatment of Materials
When a Brown’s Gas flame is played over the surface of materials, there are effects that can be beneficial. Iron becomes rust resistant, and can be surface hardened to prevent wear. Brick and cement become corrosion and water proof.

Combustion Enhancement
Brown’s Gas has been proven to help burn water/fossel-fuel mixtures in a ratios of up to 90% water. This works in internal AND external combustion (from vehicles to home heating and electrical power plants).

Water Gas?

Facebook Twitter Google-plus

 

bg clear.jpg(In 1996) We built a ‘clear’ series-cell Brown’s Gas electrolyzer, using the instructions in my Brown’s Gas Book Two. To the right is a picture of the actual electrolyzer used to first see the ExW constituent of BG. This electrolyzer evolved into our ER50 design.

We found, as we’d expect in a bipolar electrolyzer design, oxygen gas being formed on the positive side of each plate and hydrogen gas being formed on the negative side of each plate but then we also saw a third ASTONISHING thing.

We can see (and we see it every time) a THIRD gas being formed exactly in the middle BETWEEN the plates . . . in the fluid itself.   There is no connection between the bubbles coming off the plates and the line of bubbles coming out of the fluid; the fluid is clear.

You have never seen THIS in your high school physics class.   I can see gas being formed exactly midway BETWEEN the plates in my transparent series-cell electrolyzers. It starts as a line of bubbles from the top to the bottom of the cell, so solid that it looks like another plate. This line of bubbles becomes visible in about three seconds from the time the electrolyzer is turned on. The line of bubbles then widens till it meets the bubbles being formed on the plates and the cell is full of bubbles (this takes about eleven seconds).

You can see the ExW formation as the third item shown in this ‘Plants Don’t Lie’ video:

 

I think the gas formed in the fluid is a unique component of Brown’s Gas (BG).   My new theory is that Brown’s Gas contains 6 constituents H2, O2, H2O (as water vapor), H2O (as ‘electrically expanded water’ (ExW)) H and O.  

Matter has 4 phases; solid, liquid, gas and plasma.  ExW is water that has soaked up extra electrons to become a negatively charged plasma phase of water.  ExW is NOT the same as the miss-named EZ ‘water’ of George Pollack.  EZ water is not even water, it’s H3O2 and exists in a gel-like state.  It is NOT the ‘Fourth Phase of Water’.  If anything EZ water would be phase 1.5, existing between solid and liquid.

I now think any gas formed ON the plates is mostly normal diatomic oxygen and hydrogen. It stands to reason that gas formed on the plates would initially be mon-atomic, immediately changing to di-atomic (because of brownian movement and association) and would then stay di-atomic. 

An anomaly is that several tests of BG have confirmed that 1% to 3% of the gas does remain in the mon-atomic state.  Just because we don’t (yet) understand WHY doesn’t mean we should ignore FACTS.

When very high amperage is used, the line of bubbles forms faster and at first assumes a bowed shape, before stabilizing as a straight line in the middle of each cell.   This is where we think the ExW component of Brown’s Gas forms (water that has absorbed enough actual electrical energy to become a gas that is not steam).  

In one, finely tuned, experiment we achieved TWO lines of bubbles perfectly dividing the cell into thirds. From this we assume that frequency tuning is important to achieving the ExW component of BG. We’ve discovered that, in any given design of electrolyzer and set of operating conditions there will be a DC frequency that is most efficient.

BG has energy characteristics that are unexplained, like it’s ‘cool’ flame temerature yet high energy flame. BG has only 1/10th the BTU energy of acetylene but will heat a tungsten rod faster than acetylene (see BG video 3).

I think we have a situation where water is absorbing electricity (electrons) and expanding to a gasious state that is NOT steam or water vapor. This gasious form of water is combustible (it implodes) and it is stable (remains in a gasious state with changes in temperature).

I think when the electricity (in the Brown’s Gas) is released by the ‘flame,’ it manifests with electrical effects and the water ‘implodes’ to it’s original liquid form, with no heat and no expansion first. That’s also why the BG flame is ‘cool’ yet has high energy effects.    

Working with scientists and experimenters around the world, we have discovered new several new things about Brown’s Gas. One of which I’m detailing here:

It now seems that Brown’s Gas may NOT mon-atomic hydrogen and oxygen like I originally theorized in Brown’s Gas Book 1 (which will make the nay-sayers happy) 
but instead contains a special form of WATER; actual water which has had enough electrical energy added to it to form a gas that is NOT steam (this will make the nay-sayers unhappy again).  

I now theorize that a significant portion of the BG is Electrically Expanded Water, ExW).  A form of water that has soaked up electrons like a sponge soaks up water… And thus turned into water’s fourth state of matter, a negatively charged plasma.

Steam is water that has heat energy added to it, (becoming a gaseous form of water) but loses it’s volume (eventually returning to liquid form) if cooled.   BG is temperature stable and will not ‘condense’ if cooled.

I think the ExW component of Brown’s Gas is water that has had electrical energy added to it, in a very unique way, to make the water into an ‘electrical’ gas. ExW is still water (H2O); ExW has NOT split into hydrogen and oxygen, which is why burning ExW results in an implosion without a pre-explosion like when you combust hydrogen.

Brown’s Gas is stable in storage, it’s ExW component is implosive, it has a ‘cool’ flame and seems to put a pure electrical energy directly into whatever material its applied to. Brown’s Gas seems to be an ‘electrical’ flame, not a ‘heat’ (BTU) flame.    

When ‘burned’ the ‘flame’ releases electrons that can be measured, like in this simple experiment:  Some of the effects of BG are very hard to explain if an electrical potential is not assumed, like this one http://www.youtube.com/watch?v=uumlEhqb0-8

BROWN’S GAS = EXPANDED WATER?  FAQ: What is Brown’s Gas?
A long time researcher of Brown’s Gas (Todd Knudtson) once described the Brown’s Gas (to me) as a ‘fluid crystal’ which I had to accept at the time because I could see no other explanation that covered my experience/intuition about the gas. I thought somehow the mon-atomic hydrogen and oxygen were not finding each other and recombining into di-atomic molecules.

It is easy to measure that the Brown’s Gas has >100% volume of gas produced when compared to the Faraday Laws. You can find my math on this in my ‘Brown’s Gas Book 1.’  

Since then I (working with others who wish to remain anonymous) have reconfirmed the math of the ‘weighing’ data of William Rhodes. This is a simple, easily duplicated experiment and is very conclusive. Simply weigh the gas.

It is important to note that the gas being weighed must come from an electrolyzer that exhibits characteristics mentioned in my Brown’s Gas Books.   It now seems more clear; Brown’s Gas contains ‘electrically expanded water molecules’ (ExW).

Brown’s Gas is too heavy to be mon-atomic, it is even too heavy to be di-atomic; but it is exactly the right weight to be water-gas (di-hydrogen oxide in gaseous form).

I currently think that the ExW component of Brown’s Gas is water and that it is water that has absorbed electricity like a sponge absorbs water. I think that the H2O atomic bonds are NOT broken, so ExW is STILL WATER; just in a high energy gaseous form that is NOT steam or water vapor.  

Brown’s Gas exhibits mon-atomic volumes and energy levels (as per my Brown’s Gas Books) and is able to maintain this situation because the hydrogen is still associated with their respective oxygen, just in a higher ‘energy-state’.

I have some additional evidence on this from Dr. Clark in California, who developed the math for Dr. Randall Mills hydrogen research.  Now for those that want to see the math, here is the experiment described by William Rhodes himself. 

LIFTING POWER OF ELECTROLYZED MIXED GASES
First, be aware we are dealing with common-ducted gases, data being absent from NIST and the literature. There is also theory vs experimental evidence to contend with.

From the CRC handbook: “Lifting power of 1 cu/ft hydrogen is about 0.075 lb. at 760 mm pressure.”  

SETUP: Our test volume chosen was 1 liter single duct electrolyzed gases. An igloo from a plastic pop bottle was cut to provide exactly 1000 ml volume between the flat igloo door top, and the upper dome. (1000 ml was from a standard 1000 ml flask, transferred to the pop bottle, marking the door top, and extend- ing the igloo another 2″, where it was lathe cut and the doorway snipped out. It was located inverted on the pan of our Mettler milligram balance. An L shaped tube on lab stand extended through the doorway and bent upward ending near the dome top, leaving the balance completely free of interference.  

The gas generator was purged of air 15 minutes. The balance was tare arbitrarily adjusted for 30 grams +- 1 mg. The igloo was filled with pipe smoke; -6 mg deflection noted due to warmer air. The gas tube was attached and maximum weight reduction of 0.510 grams was attained, rounded off to the nearest mg. Gas input was allowed to flow for 30 minutes for accuracy. 5 minutes after gas cutoff, the balance returned to the pre-gas reading caused by rapid diffusion of electrolyzed gases into atmosphere.   Comparing H2 lifting power, 1 liter mixed gases multiplied to 1 cu/ft provided lifting power of 0.0311 lb. Or 41% that of H2.”    

 

CALCULATION OF LIFTING POWER OF BROWN’S GAS Now I will summarize the facts that others and I discovered upon analyzing the above experiment. The conclusion is interesting.  

From the CRC handbook: “Lifting power of 1 cu/ft hydrogen is about 0.075 lb. at 760 mm pressure.” We calculate molecular hydrogen under the bell to weigh about 0.089 gm per L giving that “lifting power” of .075 lb. per cubic ft (1.2 gm per liter).

Let’s say that air as an “ideal gas” weighs about 1.29 gm per L. (29 gm in 22.4 L at STP). Testing with molecular hydrogen should give 1.29-.09 =1.2 gm/L of “lifting power” which computes with the CRC reference.

0.5 gm per liter is equivalent to .0311 lb. per cubic foot? I calculate it to be .0312136 which is pretty close.   NOTE: A standard volume (22.4L) contains the molecular mass in grams at STP. See ‘Brown’s Gas Book 1’ for more on this.  

In pure Brown’s Gas, the atomic weight would be 18, if we assume a gaseous form of water. Two atoms of hydrogen and one of oxygen forming one molecule.   2 moles of H2 (a total molecular mass of 4 gm) + 1 mole 02 (a di-atomic molecular mass of 32 gm) ie: 3 mole of gaseous mix weighs 36 gm and occupies (22.4×3) L = 67.2L or 36/67.2 gm per L or 0.53 gram per liter.   2 moles of H = 2 grams in 44.8 liters. 1 mole of O = 16 in 22.4 liters. 18/67.2 = 0.2678 gram per liter; (half that of di-atomic).  

If Brown’s Gas were to be a newly discovered “ideal gas” (gaseous water) of H20, one mole would weigh 18 grams in 22.4L or 0.8 gram per liter.   So Brown’s Gas would be heavier than the molecular 2:1 mix (both measured at STP).  

Assuming that the test gas is mon-atomic it should weigh 0.2678 gm per L. 1.29-0.2678 = 1.0222 gm/L lifting power.   Assuming that the test gas is di-atomic it should weigh 0.53 gm per L. 1.29-0.53 = 0.76 gm/L lifting power.   Assuming that the test gas is molecular ‘water-gas’ it should weigh 0.8 gm per L. 1.29-0.8 = 0.49 gm/L lifting power.   So we can say that the test gas weighs (1.29-0.51) = 0.78 gm/L.

In my personal (George Wiseman’s) experience I discovered the ‘heavier than air’ ExW aspect/component of BG by accident. 
I was grinding on an ER1150 WaterTorch frame and some sparks flew over the waterfill hole, which I had covered with a cloth to prevent impurities from falling in. The hole had been open for over a day and I had no concern about igniting hydrogen, but SOMETHING went WHOOSH as sparks ignited it. 
Note that it didn’t go BANG like a hydrogen explosion would. It went whoosh like an instant vacuum had happened and air was rushing in to fill the area.

I subsequently discovered that if I fill a 2 liter transparent pop bottle with BG, then leave it sit for at least 15 minutes (with the lid off), the remaining mixture is implosive  If you ignite it too soon the result is VERY explosive because the hydrogen has not had a chance to escape. 

So, the ExW is heavier than air and will stay in the bottle as the hydrogen escapes. If the quality/quantity of the ExW is high enough to support combustion, it will IMPLODE with no pre-explosion.

It burns as a ‘slow’ imploding donut shaped flame as it moves down inside the bottle; quite interesting to watch.  The donut is formed as air rushes into the ‘center’.  Air rushes in as a ‘vacuum’ is formed in the bottle, as the ExW implodes.

Thus we are left with the conclusion that Brown’s Gas is more than mon-atomic and di-atomic gas, adding a component of uniquely expanded water. The ExW is a combustible water in a gaseous form that is NOT steam or water vapor.  

I currently think that Brown’s Gas contains an electrically expanded form of water that evolves right out of the electrolyte fluid itself (not on or from the electrolyzer electrode ‘plates’).

And the fact that BG heats up materials in a very different manner than BTU based flames. It seems to inject the electrical energy directly into the atomic structure of the atom, so that the atom becomes energized. What the atom then does depends on how it reacts to electricity… materials that are insulators (cannot get rid of electrical energy quickly) heat up remakably quickly. Materials that conduct electricity easily do not heat up to as high a temperature.

The ExW is a high-energy form of water that carries it’s energy as a form of electricity. Several experiments have measured an electrical pulse as the gas is exploded, or even just burned.

Obviously more testing needs done by organizations that have proper equipment. Let me know if anyone is interested in independently verifying tests like this.  

Note: Brown’s Gas as produced by most electrolyzers (even my super-efficient designs) has enough di-atomic hydrogen and oxygen in it to be initially explosive. Though the explosion is not quite as violent as a pure ‘diatomic’ 2H2:O2 explosion.   
Note: Previous ‘mon-atomic’ theory mathematics are still valid as per energy potential per volume of gas electrolyzed.

I am now rating the gas as ‘proof’ instead of ‘percent’. In my previous literature I rated the quality of gas that comes off the cells by a percentage of electrical input to volume ratio (kWh/liter), comparing the actual volume to Faraday ‘predicted’ gas volume.

In normal electrolysis, for a given amount of electricity you would get about 1860 liters of 2H2:O2 per liter of water. This would be 100% Faraday efficiency. 

With Brown’s Gas electrolyzers it’s possible to achieve higher gas volume than Faraday efficiency, because the ExW constituent of BG is NOT H2 or O2.    ExW is a gas formed independently of the electrodes.

When I rated my ER1150 WaterTorch as 130%, some people think that means I’m doing ‘over-unity’ gas production. I see no ‘over-unity’ in Brown’s Gas.  We are simply adding a THIRD GAS that the Faraday equations don’t account for.

While there is more gas produced than Faraday Laws predict, it is because there is an ‘extra’ gas produced that is not included in Faraday calculations. By rating at greater than 100% I am just trying to use a method to indicate gas quality (quantity of ExW) so that people can know the quality of gas coming from various Brown’s Gas machines.

So now I rate gas quality as ‘proof.’ My ER1150 WaterTorch puts out 130 proof Brown’s Gas.  You can build these ‘super-efficient’ electrolyzers using the plans in my Brown’s Gas Book 2.

For more information about BG and ExW, see my FAQ for BG and HyZor Technologies.