ER50 Fully Assembled

$968.00

The ER50 is mostly designed to make BG bubbled water.

The ER50 can be made to work to breathe the BG, if your wife doesn’t mind having a ‘science experiment’ looking device in the house (mine didn’t allow it).

But you’ll be buying and/or making parts that are included with the AquaCure… The AquaCure AC50 is ‘ready to go’, has a 1 year satisfaction guarantee and a lifetime warranty.

The AquaCure AC50 gas production can be varied for safe breathing.

The AquaCure is ‘chock full’ of safety features, so it not only takes care of itself, it takes care of YOU and your loved ones.

It takes a bit to put the ER50 together and it doesn’t have all the conveniences and safeties of the AquaCure.

Here is the ER50 Assembly and Operation Manual which identifies all the parts and shows how they go together.

Here is an online ER50 assembly video

You can buy ‘just’ the ER50 Basic Kit.  Here is the kit version / cost

Yes, we are upselling the AquaCure AC50, because we are proud of it.  But if you have what it takes to make the ER50 work, it WILL WORK.

You can still buy the fully assembled ER50 (see below) but most people choose the AquaCure  (once they see the features of the AquaCure). We’re including this note so you can make an informed choice.

Category:

Description

The ER50 is:
• Portable ‘table-top’ size/shape.

• Easy to set up, use and maintain;
~ proven to operate for decades.
~ 10% duty cycle
(can operate continously at 50 L/hr for 20 minutes then rest to cool down for 3 hours)

• Simple, practical 40 series-cell design.

• Significantly more efficient
~ than traditional electrolyzers.

• Produces Brown’s Gas (aka BG or HHO)
~ for health purposes.

• Produces 50 litres per hour;
~ output can be increased to 100+ L/hr,
(see ER50 Resources).
But that reduces the duty cycle to 5 minutes
Duty cycles can be increased to continuous if enough cooling fans are added to prevent the plastic from exceeding 37°C

• Compatible with all worldwide power standards*
~ from 100 to 270 VAC and 45 to 65Hz.

*Comes Standard with timer and plug compatible with North American 110-120 VAC 60 Hz.
If you have 220-240 VAC 50 Hz power, please tell me (in order notes) so that I can appropriately optimize the Fully Assembled ER50 power supply.  I’ll include a plug adaptor to plug the ER50 into your local wall socket and only one capacitor.

The ER50 is a high quality, custom-built Brown’s Gas (HHO) electrolyzer can exceed the efficiency of ANY known commercial electrolyzer (except ours, of course :))

NOTE: Because of Vested Interest Suppresion (see story here), specifically that the USPS and UPS were DELIBERATELY smashing (I have documented proof) the ER50s, I have started building the ER50s into a really strong shipping crate, (so far none of these have been smashed).
So now the shipping crate is ALSO the stand for fully assembled ER50 operation and use.

NOTE: ‘Attachments’ like the bubbler, arm and leg bags, nose canuula, etc., are not included.  We tell you exactly how to make them and/or where to get them in the online ER50 Resources

NO transformer needed: This electrolyzer uses Capacitive Amperage Limiting (CAL) power supply technology, as detailed in our Brown’s Gas Books to achieve its safe and simple, inherent super-efficiency.

The gas Pressure Relief Tubes (PRTs) Upgrade is now included at no additional charge.  These are the transparent side tubes.  This is a SIGNIFICANT efficiency upgrade.

The tubes and tower are no longer Transparent PVC. To see the liquid level, just use the transparent side tubes (PRTs).  Transparent PVC is GREAT to see the Brown’s Gas (and ExW) being produced but the clear plastic has a really low softening temperature, exhudes oils into the electrolyte (which causes foaming) and gradually clouds (becomes translucent) anyway.
So all new kits will have white PVC only.

The Electrical Efficiency Upgrade option is described in the ER50 Resources.  There are several ways to increase the wattage effciency of the ER50.  We don’t do it in the ‘standard’ version because (frankly) it’s more costly… But if you want maximum efficiency (which can go over 100% Faraday efficiency) we tell you how to do it.

The WaterTorch Upgrade option is described in the ER50 Resources.  The ER50 was originally designed to be a tabletop electrolyzer to provide a superior fuel-gas to mini-torches.  Handymen, Jewelers and Artists LOVE this gas once they try it, as it does a MUCH better job than traditional bottles gasses like acetylene.

The Float Switch Upgrade option is described in the ER50 Resources.  Float switch (automatic low water shutoff) is added when upgrading to the Agriculture application of the ER50, because the ER50 will be operating for hours unattended and low water level would kill the machine.  If you want the float switch ADDED to your fully assembled ER50, the additional cost is $300 (add the $300 to your order by purchasing 300 general purpose units).

Access privileges to Eagle-Research’s ER50 Resources is automatic (no extra charge)with the purchase of this Fully Assembled ER50 Electrolyzer.

ER50 Resources includes up-to-date upgrades, assembly assistance, operation assistance and application details that substantially enhance the ER50…

For some relevant and amazing health testimonials, see the bottom of the ER50 Kit sales page.  For MY testimonial, see the document ‘Plants Don’t Lie‘.

SKU# ER1-D1-0005 • device • shipping size/weight = 14″H x 24″L x 6″W • 16.5lb / 7500gm

 

NOTE: When crate arrives, you’ll need a #2 Robertson (square head) screwdriver to open it.

 

NOTE: For people who find the upfront cost of our electrolyzers high for their budget, we now offer a financing option through PayPal.

The financing is 6 equal monthly payments + a small finance fee.
To get the financing, just purchase the product using the PayPal option as you check out (you’ll need a registered PayPal account) and the financing option will automatically be presented to you (if you qualify) during the normal checkout (payment) process.

The ‘finance option’ is presented to you once you ‘log into’ PayPal but BEFORE you actually purchase, so you can see if you quailify before actually spending your money.

Most people who have had their ‘verified’ PayPal account for longer than 3 months will qualify for financing.

Questions about the “Bill Me Later” PayPal financing program should be directed to PayPal Customer Support at (866) 528-3733

Additional information

Weight 264 oz
Dimensions 23.75 × 5.75 × 13.75 in

Reviews

There are no reviews yet.

Be the first to review “ER50 Fully Assembled”