- Practical ‘table-top’ design.
- Easy to set up and use.
- Simple 40+ series-cell design.
- Significantly more efficient
~ than traditional electrolyzers.
- Produces Brown’s Gas
~ for experimental purposes.
- Compatible with all worldwide power standards
~ from 100 to 270 VAC and 35 to 65Hz.
- Produces 50 litres per hour at 120 VAC and 60Hz using 2 capacitors.
~120 VAC BG production can be increased to 100 L/Hr by doubling capacitance.
~ we tell you where to order extra capacitors if you want them.
- Produces up to 100 liters per hour
at 120 VAC and 60Hz using 4 capacitors.
- Produces up to 100 liters per hour
at 240 VAC and 50Hz using 2 capacitors.
This kit includes the ‘special’ parts needed to set up this small, high quality, experimental electrolyzer that will exceed the efficiency of ANY known commercial electrolyzer (except ours, of course :))
Commonly available (or optional) parts like the timer switch, float switch, wires, terminal ends and supplies like glue and lye (the electrolyte), are not included.
The ‘extra’ components shouldn’t cost more than $60.
You need to know how to wire a light circuit to have the skill level required for the electrical assembly and simple construction skills (and tools) to cut the plastic tubing and build the stand.
Comprehensive, up to date instructions are in the ER50 online Resources, which you get access to immediately after purchase of an ER50 Kit.
NO transformer needed: This electrolyzer uses Capacitive Amperage Limiting (CAL) power supply technology, as detailed in our Brown’s Gas Books (2 capacitors are included in box) to achieve its super-efficiency. For more gas (BG) production, use more capacitors ~ the ER50 Resources tells you where you can order extra capacitors at surplus prices.
The gas Pressure Relief Tubes (PRTs) Upgrade ($50 value) is now included at no additional charge. These are the transparent side tubes. This is a SIGNIFICANT efficiency upgrade as it helps increase gas production without increasing electrical input.
Access privileges to Eagle-Research’s ER50 Resources is automatic (no extra charge) with the purchase of this ER50 Electrolyzer kit.
ER50 Resources includes upgrades, assembly instructions and application details that you need to understand, optimize, build and use your ER50…
The tubes and tower are no longer Transparent PVC. To see the liquid level, just use the transparent side tubes (PRTs).
Transparent PVC is GREAT to see the Brown’s Gas (and ExW) being produced but the clear plastic has a really low softening temperature, exhudes oils into the electrolyte (which causes foaming) and gradually clouds (becomes translucent) anyway.
So all new kits will have white PVC only.
The ER50 is designed to last for decades. The biggest killer of the ER50 is people running them too long without cooling. The ER50 is not designed to exceed 37°C. If it gets too hot, the plastic will deform enough so that the fittings will start to leak. The duty cycle at 50 lph is about 20 minutes with a 3 hour cool down. The duty cycle can be extended if 3 of 4″ computer cooling fans are added to prevent the plastic from exceeding 37°C.
The Electrical Efficiency Upgrade option is described in the ER50 Resources. There are several ways to increase the wattage effciency of the ER50. We don’t do it in the ‘standard’ version because (frankly) it’s more costly… But if you want maximum efficiency (which can go over 100% Faraday efficiency) we tell you how to do it.
The WaterTorch Upgrade option is described in the ER50 Resources. The ER50 was originally designed to be a tabletop electrolyzer to provide a superior fuel-gas to mini-torches. Handymen, Jewelers and Artists LOVE this gas once they try it, as it does a MUCH better job than traditional bottles gasses like acetylene.
The Float Switch Upgrade option is described in the ER50 Resources. Float switch (automatic low water shutoff) is added when upgrading to the Agriculture application of the ER50, because the ER50 will be operating for hours unattended and low water level would kill the machine.
|Eagle-Research Assembled Chamber||Customer-Finished, Fully Operational|
SKU# ER1-K1-0004 • kit • 6″H x 12″L x 9″W • 6.6137lb / 3000gm
For people who find the upfront cost of our electrolyzers high for their budget, we now offer a financing option through PayPal
The financing is 6 equal monthly payments + a small finance fee.
To get the financing, just purchase the product using the PayPal option as you check out (you’ll need a registered PayPal account) and the financing option will automatically be presented to you (if you qualify) during the normal checkout (payment) process.
The ‘finance option’ is presented to you once you ‘log into’ PayPal but BEFORE you actually purchase, so you can see if you quailify before actually spending your money.
Most people who have had their ‘verified’ PayPal account for longer than 3 months will qualify for financing.
Questions about the “Bill Me Later” PayPal financing program should be directed to PayPal Customer Support at (866) 528-3733